Piggyback cooling unit – up to 14 m³ per performance table, 230 V, 460 × 928 × 775 mm

The piggyback cooling unit offers a compact wall-mounted solution for commercial refrigerated cells. Circulating air cooling supports uniform air distribution, while the digital Dixell controller enables simple temperature adjustment and monitoring. LED interior lighting is included as standard.

The unit is suitable for wall thicknesses of 80 to 150 mm. Automatic defrosting simplifies operation; condensation water is discharged via a drain. No evaporative condensation system is present. The white powder-coated steel housing is easy to clean.

The maximum suitable cooling chamber volume depends on internal and ambient temperature. The stated 14 m³ applies according to the performance table at +5 to +10 °C internal temperature and maximum +32 °C ambient temperature. At lower internal temperatures or higher ambient temperatures, the possible cooling chamber volume is reduced.

Product advantages:

• Compact piggyback design for wall mounting

• Suitable for wall thicknesses of 80 to 150 mm

• Digital Dixell temperature control and temperature display

• Circulating air cooling

• LED interior lighting

• Automatic defrosting

• Condensation water drain

• Refrigerant R290

• Plug-ready connection with Schuko plug

Technical specifications:

Performance data for cooling chamber design:

The volume specifications were determined with 80 mm cooling chamber insulation. Use is intended exclusively in frost-free and rain-protected environments.